SCHUNK ROTA THWvario, Assembly And Operating Manual, Page: 75 / 77

Accessories
01.00|ROTA THW vario |en-US 75
3 Pneumatic-hydraulic changing
For the multi-spindle unit, the space-saving changing device
type WP
with pneumatic-hydraulic pressure converter is
usually used.
WARNING
When operating the changing device, do not reach into the
moving parts due to the danger of crushing.
Jaw turning rings
Clamping head HSW 65 BZI
Standard bores:
Ø 8 mm, 20 mm, 40 mm
- for self-turning
- front side and soft bore
The clamping length should be at least 6 mm.
Clamping head HSW 80 BZI
Standard bores:
Ø 20 mm, 30 mm, 40 mm, 60 mm
- for self-turning
- front side and soft bore
The clamping length should be at least 6 mm.
Clamping head HSW 100 BZ
Standard bores:
Ø 30 mm, 45 mm, 65 mm, 90 mm
- for self-turning
- front side and soft bore
The clamping length should be at least 2 mm.
14.2.3