Basic safety notes
03.00|1341130_ROTA NCR-A |en
7
Basic safety notes
Intended use
This product is intended for clamping workpieces on machine tools
and other suitable technical devices.
•
The product may only be used within the scope of its technical
data,
•
The product is intended for industrial and industry-oriented
use.
•
Appropriate use of the product includes compliance with all
instructions in this manual.
•
The maximum RPM of the chuck and the required clamping
force must be determined by the user for the respective
clamping task based on the applicable standards and technical
specifications of the manufacturer.
(See also “Calculations for clamping force and RPM” in the
chapter “Technical data”).
Not intended use
A not intended use of the product is for example:
•
It is used as a press, a punch, a toolholder, a load-handling
device or as lifting equipment.
•
the product is used for unintended machines or workpieces.
•
the technical data is exceeded when using the product.
•
if workpieces are not clamped properly, paying particular
attention to the clamping forces specified by the manufacturer.
•
if it is used in working environments that are not permissible.
•
if the product is operated without a protective cover.
Constructional changes
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of the
product or damage it.
•
Structural changes should only be made with the written
approval of SCHUNK.
2
2.1
2.2
2.3
