Maintenance and care
40
04.00|1151449 KSPplus-BWM, KSP-LHplus-BWM |en
5 After 24 hours, the clamping force block is:
– sealed if the pressure gauge indicates a drop in pressure of
less than 0.5 bar.
– leaking if the pressure gauge indicates a drop in pressure of
more than 0.5 bar.
If the clamping system is leaking, check the screws first (e.g. with
Metaflux leak detection spray). Seal any leaking screws.
Once the screws are sealed, check for leaks and replace if
necessary (see Disassembling and assembling the clamping block
Testing quick-change jaw function
A function check consists of checking to see if the motion kinemat-
ics are easy to move and if the lock bolt (31) automatically resets.
1 Insert the hexagonal socket screwdriver into the hexagonal
socket of one of the three access points on each base jaw.
2 With moderate manual force, turn the screwdriver counter-
clockwise until it stops in order to lower the lock bolt.
3 Release the torque on the screwdriver and see if the kinematics
reset automatically and the lock bolt rises completely up. Check
the motion kinematics multiple times in alternating fashion.
4 Check the actuating mechanism by pressing on the front of the
lock bolt. To do this, insert the changing jaw (accessory,
) into the hook attachment on the change
interface and press it down and back. This briefly presses the
lock bolt down, and it automatically snaps into the changing
jaw's locking bore.
5 Check to see if the changing jaw can be unlocked by pressing on
the front of the lock bolt with a hexagonal screwdriver.
To do this, position the hexagonal screwdriver on the lock bolt
through the access hole on the change jaw. Press the lock bolt
down while tilting the tool toward clamping center. The chang-
ing jaw should disengage and can now be lifted off the change
interface with two hands or tilted toward the middle of the
clamping system. Attention: Never press on the lock bolt with
the hexagonal screwdriver without a changing jaw in place.
Inju-ry may occur if the tool slips while pressing without a
lateral guide.
8.3
