_________________________________________________________________________________________
schunk.com
XND.00033.002_A – 10/2018
24
2
General safety instructions
2.1
Intended use
The clamping device may only be used in accordance with the technical data and has been
designed for stationary application on milling machines in an industrial environment.
Using the device in accordance with the intended purpose includes compliance with the
commissioning, installation and operating instructions, and with the environmental and
service conditions as provided by the manufacturer.
The manufacturer accepts no liability for damage resulting from non-intended use.
2.1.1
Technical data
Exposure to loads in excess of the max. clamping torque results in damage to the spindle.
Weight:
KSC-D 125-320
Standard without jaws:
14.0 kg
KSC-D 125-390
Standard without jaws:
17.0 kg
KSC-D 125-460
Standard without jaws:
20.0 kg
KSC-D 125-530
Standard without jaws:
24.0 kg
KSC-D 125-600
Standard without jaws:
27.0 kg
KSC-D 125-670
Standard without jaws:
30.0 kg
KSC-D 125-740
Standard without jaws:
34.0 kg
For further data, please see the current catalogue >> Schunk stationary Workholding <<
Version
max. torque
max. clamping force
KSC-D 125
100 Nm
40 kN
Clamping torque / clamping force
