SCHUNK KGG 100-40, Assembly And Operating Manual

Page: 22 / 44

Assembly
22
15.00 | KGG 60-20 ... 140-60 | Assembly and Operating Manual | en | 389166
5.4.3 Setting dimensions for magnetic switches
Setting dimensions l1 (a) and l1 (b) from the edge of the support to the front of the
sensor
The setting dimension applies for the following sensors:
Type Position l1 (a) in groove a Position l1 (b) in groove b
MMS
22-A /
MMS
22-IOL
MMS-P
22
MMS-22
PI1 / PI2
MMS
22-A /
MMS
22-IOL
MMS-P
22
MMS-22
PI1 / PI2
KGG
60-20 1 mm 1 mm 1 mm 36 mm 36 mm 36 mm
KGG
70-24 1 mm 3 mm 1 mm 40 mm 41 mm 40 mm
KGG
80-30 - 0 mm 0 mm - 40 mm 37.5 mm
NOTE
The magnetic switch MMS 22-PI1 can be adjusted and taught in
two ways: "Standard mode" and "Optimal mode",
Mount
programmable magnetic switch MMS 22-PI1 [
}
28]