Basic safety notes
12
05.01|EVG 55|en
The product may only be used in the following locations if additional
measures are taken:
• In locations with a high level of ionizing radiation
• In locations with difficult operating conditions, e.g., due to
caustic fumes, gases, oils or chemicals
• In facilities requiring special monitoring, e.g., in particularly at-risk
areas
The product must also not be used in potentially explosive zones. If
the product is subjected to unacceptably large impacts or vibrations,
suitable measures must be taken to reduce the amplitude or acceler-
ation of such disturbances. Vibration-damping or vibration-absorbing
systems are to be used in such cases.
Tests regarding mechanical environmental conditions
The product has been tested with respect to mechanical environ-
mental conditions according to the following standards:
Standard
Title
EN 60068-2-6
(2008-10)
Test procedure - test Fc: swinging (sinusoidal)
EN 60068-2-27
(2010-02)
Test procedure - test Ea and guideline: shocking
Testing environmen-
tal conditions