SCHUNK AOV, Assembly And Operating Manual

Page: 14 / 40

Technical data
14 01.00 | AOV | Assembly and Operating Manual | en | 1454623
3.3 Compliance force
NOTE
The compliance force may vary from product to product and
should be treated as a guide value only. The actual force
characteristics depend on the installation position and the
condition of the product. The compliance pressure should be
selected depending on the material of the workpiece, the type of
tool and the amount of material to be removed.
NOTE
The specified compliance force only corresponds to the actual
values when the product is mounted horizontally and the motor is
switched off.
Compliance force
(retract)
Supply pressure [bar]
Compliance force (retract) [N]
Compliance force (retract) as a function of the operating pressure
Compliance force
(extend)
Supply pressure [bar]
Compliance force (extend) [N]
Compliance force (extend) as a function of the operating pressure