SCHUNK AOV, Assembly And Operating Manual

Page: 9 / 40

Basic safety notes
2.7 Personal protective equipment
Use of personal protective equipment
Personal protective equipment serves to protect staff against
danger which may interfere with their health or safety at work.
• When working on and with the product, observe the
occupational health and safety regulations and wear the
required personal protective equipment.
• Observe the valid safety and accident prevention regulations.
• Wear protective gloves to guard against sharp edges and
corners or rough surfaces.
• Wear heat-resistant protective gloves when handling hot
surfaces.
• Wear protective gloves and safety goggles when handling
hazardous substances.
• Wear close-fitting protective clothing and also wear long hair in
a hairnet when dealing with moving components.
• Wear ear protection and safety goggles during the machining
process.
2.8 Transport
Handling during transport
Incorrect handling during transport can make the product unsafe
and risk the danger of serious injuries and considerable material
damage.
• During transport and handling, secure the product to prevent it
from falling.
• Do not walk under suspended loads.
2.9 Malfunctions
Behavior in case of malfunctions
• Immediately remove the product from operation and report the
malfunction to the responsible departments/persons.
• Order appropriately trained personnel to rectify the
malfunction.
• Do not recommission the product until the malfunction has
been rectified.
• Test the product after a malfunction to establish whether it still
functions properly and no increased risks have arisen.
9 01.00 | AOV | Assembly and Operating Manual | en | 1454623