Assembly and settings
16
03.00 | AGE-F-XY | Assembly and Operating Manual | en | 389002
Insert set-screw or
screw
NOTICE
The set-screw can fall into the housing if it is screwed in too far.
The compensation unit can jam.
•
Observe the minimum length of the set-screw!
Ø
Remove the set-screw (52) using a hexagon socket wrench.
NOTE
There is no stroke limitation with AGE-F-XY 31.
4.4 Adjusting, removing and replacing the return spring for units
built before June 2016
The unit contains
4 compression springs for the return position function. The units
are set ex-works in accordance with the catalog values.
Adjustment
These force values can be slightly changed on the unit by adjusting
the set-screws (50).
NOTE
If the set-screws are screwed in too far, this will cause the unit to
jam (springs on block). This can be determined if the unit can no
longer perform the complete stroke or no longer moves
Setting dimension X
see table
Setting dimension for the set-screw
