Operation
Materials/Application
Features/Benefits:
Aluminum Cut, 3/8” Burr Diameter, 5/8” Burr Length, 1/4” Shank
• For greasy aluminum alloys, soft non-
ferrous metals and thermoplastics.
• For deburring.
• For use on cast aluminum.
• Easy chip flow through positive
rake angle, rounded base of
tooth, convex tooth back.
• No loading of the flutes, not even
while cutting sticky metals.
• Smooth operation due to the
peeling effect of the teeth.
Aluminum Cut, 3/8” Burr Diameter, 5/8” Burr Length, 1/4” Shank
• For greasy aluminum alloys, soft non-
ferrous metals and thermoplastics.
• For deburring.
• For use on cast aluminum.
• Easy chip flow-through positive
rake angle, rounded base of
tooth, convex tooth back.
• No loading of the flutes, not even
while cutting sticky metals.
• Smooth operation due to the
peeling effect of the teeth.
Cut FVK, 1/4” Burr Diameter, 5/8” Burr Length, 1/4” Shank
• For trimming and contour milling of all
glass and carbon fiber reinforced
plastics.
• Special cut geometry allows high
feed rates due to low cutting
forces.
Alt Diamond Cut, 1/4” Burr Dia., 3/4” Burr Length, 1/4” Shank
• Universal use, for ferrous and non-
ferrous metals, plastics.
• Rough finishing of castings.
• Surface working.
• Weld removal.
• Brazed welds.
• Smoother operation, improved
tool control.
• High cutting action.
• Non-clogging.
• Smaller chips, reduced slivers.
• Even, smooth surfaces.
29
04.00 | FDB | Assembly and Operating Manual | en | 389072
