• 23 •
5. FEATURES
1.
LCD display
2.
Display button
3.
Smart cable green and red LEDs
4.
ON/OFF switch
5.
Micro USB input port
for recharging
6.
3A input/output USB port
7.
Qualcomm
®
Quick Charge
™
3.0 USB output port
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries.
Quick Charge is a trademark of Qualcomm Incorporated. All Qualcomm Incorporated trademarks
are used with permission.
4
5
6
3
8 7
9
11
10
2
1
8.
2.4A USB output port
9.
SA866 smart cable
with battery clamps
10.
Jump start output socket
11.
LED light
Not shown:
12.
Micro USB-USB
charging cable
13.
Carrying case
6. CHARGING THE JUMP STARTER
IMPORTANT! CHARGE IMMEDIATELY AFTER PURCHASE,
AFTER EACH USE AND EVERY 30 DAYS, OR WHEN THE
CHARGE LEVEL FALLS BELOW 85%, TO KEEP THE INTERNAL
BATTERY FULLY CHARGED AND PROLONG BATTERY LIFE.
6.1 CHECKING THE LEVEL OF THE INTERNAL BATTERY
1.
Slide the ON/OFF switch to the ON position. The LCD display will show
the battery’s percentage of charge. A fully charged internal battery will read
100%. Charge the internal battery if the display shows it is under 85%.
2.
To reduce the risk of electric shock, unplug the unit’s charging cable from
a USB or wall charger before attempting any maintenance or cleaning.
Simply turning off the controls will not reduce this risk.
3.
When charging the internal battery, work in a well ventilated area and do
not restrict the ventilation in any way.
6.2 CHARGING THE INTERNAL BATTERY
NOTE:
Use a 2A USB charger (sold separately), or a 2A USB
charging port to quickly recharge the jump starter. Using a charger
with less than 2A will increase charge time.
1.
Plug the Micro USB end of the charging cable into the input port. Next,
plug the USB end of the charging cable into a charger’s USB port.
2.
Plug your charger into a live AC or DC power outlet.
3.
The LCD display will light, the digit begins to flash and show “IN”, indicating
that charging has begun.
