10
15.
CHARGER MAINTENANCE INSTRUCTIONS
15.1
Unplug the charger from the booster before attempting any maintenance or cleaning.
15.2
8VHDGU\FORWKRFFDVLRQDOO\WRZLSHGLUWRURLOIURPWKHFKDUJHU'RQRWXVHFOHDQLQJÀXLGV
15.3
$OORWKHUVHUYLFLQJVKRXOGEHSHUIRUPHGE\TXDOL¿HGVHUYLFHSHUVRQQHO
15.4
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
RUVLPLODUO\TXDOL¿HGSHUVRQVLQRUGHUWRDYRLGDKD]DUG
16.
CHARGER MOVING AND STORAGE INSTRUCTIONS
Store the charger in an upright position, inside, in a cool, dry place.
17.
TROUBLESHOOTING – FOR CHARGER
PROBLEM
POSSIBLE CAUSE
REASON/SOLUTION
CHECK BATTERY (red) LED
on charger is on.
Charger is not making a good
connection to the booster.
Battery is defective (will not
accept a charge).
Check the connection. Make
sure the connection points are
clean.
Have the battery checked.
CHECK BATTERY (red) LED
LVÀDVKLQJ
Indicates the charger is in
abort mode.
See Section 14.8.
Booster shows 100% charge,
but charger still shows
charging (yellow LED).
Unit needs more charge.
Charge Booster until
the charger’s green LED
comes on.
18.
CHARGER
SPECIFICATIONS
SCI200B Charger
Input
120–240V~, 50/60Hz, 0.47–0.28A
Output
12V 2A
Approximate Charging Time
24 hours
Weight
0.54 kg
