•
11
•
PROBLEM
POSSIBLE CAUSE
SOLUTION
The charger is making an
audible clicking sound.
The charger has a relay
that turns the current to the
battery on and off.
No problem, this is a normal
condition.
The measured current is
much lower than expected.
The charger reached the
maximum voltage and is
reducing the current.
The charger detected an
over-temperature condition
and has reduced the current
to allow the unit to cool.
No problem, this is a normal
condition.
Make sure the charger does
not have the side or rear
ventilation holes blocked.
Move the charger out of the
sun and into the shade.
While charging the battery,
the battery stays at a certain
% (ex. <65%).
The % display may not
change at a steady rate.
DO NOT UNPLUG OR
CHANGE THE SETTING.
Be patient and let the charger
finish. This is normal.
When the charger is
unplugged or the settings
are changed, the number
increases or jumps to 100%.
The battery voltage is still
high from a partial charge.
Wait for the voltage to settle
before resuming the charge.
Turn on the lights to remove
the surface charge.
17. SPECIFICATIONS
Input ....................................................................................... 220-240V AC 50Hz, Max. 10A
Output ..........................................................12V DC, Max. 12A per bank; total 1000W Max.
18. LIMITED WARRANTY
WARRANTY TERMS AND CONDITIONS
Schumacher Electric Corporation (the “Manufacturer”) or the resellers authorized by the
Manufacturer (the “Reseller”) warrant this Charger (the “Product”) for two (2) years, according
to the following stipulations. Any and all warranties, other than the warranty included herein,
are hereby expressly disclaimed and excluded to the fullest extent permissible under
applicable law. Legislation may imply warranties or conditions or impose obligations on
Manufacturer which cannot be excluded, restricted or modified in relation to consumer goods.
Consumer End-User Warranty
Any claims under this warranty must be communicated to Reseller within 2 months after
discovery of the non-conformity.
Resellers/Professional End-User Warranty
The Manufacturer provides a limited warranty for hidden defects or non-conformities.
This warranty is subject to the following conditions:
a.
The Manufacturer only warrants hidden defects in material or workmanship present
in their root cause at the moment of the first sale by the Manufacturer;
b.
Manufacturer’s obligation under this warranty is limited to repairing or replacing the
Product with a new or reconditioned unit at the sole option of the Manufacturer;
c.
Manufacturer does not have any warranty obligations if the alleged defects were caused
by abnormal usage, fair wear and tear, unauthorized use of the Product or use of the
Product differing from the description in the applicable manual or other specifications
given by the Manufacturer, insufficient care, repairs carried out by persons or entities or
with parts not approved by Manufacturer, poor care, accidents, unauthorized changes
or modifications, incorrect transport, storage or treatment of the Product;
d.
In order to exercise this right, the Product must be returned complete and in its original
state and packaging, with mail costs prepaid, along with proof of purchase to the
Manufacturer or its authorized representatives in order for repair or replacement to occur.
Summary of Contents for DSR PROSERIES DSR5254
Page 14: ... 14 ...
