Schulthess Spirit eMotion TW 7335i, Instructions For The Use

Page: 63 / 68

63
Language (ex factory
DEUTSCH
)
+
÷
This setting is temporarily valid for the selected pro-
gramme and reverts back to the default language a few
minutes after completion of the programme.
See chapter «Advanced basic settings/Default language»
Extended basic settings
+ +
By pressing these three buttons at the same time, the
display shows the extended basic settings.
X Repeatedly pressing the button shows the possible
settings.
X Pressing the button allows the settings to be
changed.
X Pressing the button ends the display of the
settings.
Child lock (ex factory
OFF
)
Select «Extended basic settings»!
The child lock is to prevent accidental starting, changing
or deletion of a programme by small children.
Start a programme with the child lock switched on:
+
Hold the start button down and press the fast forward
button.
Memory function (ex factory
OFF
)
Select «Extended basic settings»!
With switched on memory button function, the special
programme last used is stored and appears again as
first on the display when next pressing the button.
Following this, the consecutive programmes can then be
selected through repeatedly pressing the button.
This way, a frequently used special programme can be
called up with only one press of the button.
With switched off function the «Reconditioning» pro-
gramme appears as first.
LCD Brightness (ex factory
150
)
Select «Extended basic settings»!
The button can be used to alter the brightness of
the text on the display.
LCD Contrast (ex factory
26
)
Select «Extended basic settings»!
The button can be used to alter the contrast on the
display.
Alarm volume (ex factory
VOLUME 2
)
Select «Extended basic settings»!
With the alarm setting switched on, a signal sounds at
regular intervals at the end of the programme.
The level can be adjusted in 3 steps.
Off
VOLUME 1
VOLUME 2
VOLUME 3
Standby function (ex factory
OFF-MODE
)
Select «Extended basic settings»!
"OFF"
The machine always remains switched on. The display
stays switched on (?).
"STANDBY-MODE"
Max. 4 minutes after the end of the programme the
machine switches off in energy saving mode. The display
will show «ZZZ».
"OFF-MODE"
Max. 4 minutes after the end of the programme the
machine automatically switches off. The display will be
dark.
"S OFF-MODE"
Max. 4 minutes after the end of the programme the
machine switches off in energy saving mode. The display
will show «ZZZ».
Max. 10 minutes later the machine automatically switches
off. The display will be dark.
Note
If the display is dark, it can be activated by pressing
any button.
Optical interface (ex factory
OFF
)
Select «Extended basic settings»!
If the optical interface (SCS) is switched on, customer
services can communicate with the machine by PC.
Default language (ex factory
DEUTSCH
)
Select «Extended basic settings»!
If another language is temporarily selected via the
buttons
and , after programme end, in standby
mode or after a long standstill, the setting reverts back
to the default language.
Delete myTop5
Select «Extended basic settings»!
When calling this function, it is always set to «OFF».
To delete the favourite programmes saved in «myTop5»,
this function must be set to «ON» and the basic setting
must be quit using the fast forward button
.
This will delete the programmes saved in «myTop5», the
basic setting is set to «OFF» again and resaves your
«myTop5» favourite programmes.