EXCLUSIONS
This warranty does not extend to:
•
Damage or deterioration after delivery from the manufacturer not attributable to defective material or
workmanship.
•
A multi-rake that has been physically altered without the approval of the manufacturer.
•
Any goods which have sustained damage or deterioration due to encounters with foreign objects for which
the product is not intended, inadequate or faulty assembly, improper or inadequate maintenance, neglect,
or abuse.
•
Shop supplies such as the use of tools, oil or grease used in the repair or replacement of a warrantable
part or component.
•
Normal wearing parts such as, but are not limited to safety chains, belting, clutch linings, blades and tire
wear.
THE WARRANTY CLAIM PROCESS:
•
A Warranty Claim must be submitted within (30) days of the repair.
•
The dealer must allow for the examination of the goods by the manufacturer or one of its agents, when
requested by the manufacturer to verify that the goods are defective in material or workmanship.
•
The Dealer must keep the failed part until the claim is processed, to allow Schulte Industries the option of
further examination of the part.
Further examination may mean that pictures are sent, or that the part be returned to Schulte
.
•
A Return Goods Authorization (RGA) must be sent with any returned part.
•
If a failed part is returned to Schulte for examination, Schulte will pay the freight,
Only ground
transportation will qualify for reimbursement. Any other types of freight will not be paid, unless
authorized on the RGA.
NOTE:
For warranty service or parts; the original owner must go through the dealership that the unit was purchased
from:
Warranty Committee Contacts:
Glen ven der Buhs
(Service Manager)
Phone:
(306) 287-4453
gvenderbuhs @ schulte.ca
Tracy Zentner
(Warranty Administration)
Phone:
(306) 287-4492
Don Willenborg
(Quality Assurance Manager)
Phone:
(306) 287-4479
Schulte reserves the right to change and modify this warranty policy at any time.
Summary of Contents for SMR-800
