Schulte RDX-117, Operator'S Manual

Page: 78 / 94

OPERATION
RDX-117 06/20 Operation Section 4-36
© 2020 Alamo Group Inc.
O
PE
R
AT
IO
N
If the tractor’s hydraulic pump is not independent of
the tractor PTO, or if the tractor PTO has to be run
to have hydraulic power, disconnect the snow
blower driveline from the tractor PTO output shaft.
Secure the driveline to the implement deck to
prevent driveline damage or loss during transport.
If the Snow Blower is equipped with a Folding Truck
Loading Chute always follow these steps before
transporting the snow blower or putting it into
storage.
1. Rotate the chute so it faces fully forward so the
folding chute rest sits fully on the rest support.
2. Retract the upper chute section and deflector
until the deflector comes to rest in the notches
of the folding chute rest. This provides
additional stability to the chute during transport.
14.1 Transporting on Public Roadways
In wet conditions where there is a likelihood of material collecting on the Implement, make
certain that this material is removed before traveling on public roadways.
(STL-7)
Never allow children or other persons to ride on the Tractor or Implement.
Falling off can result in serious injury or death.
(SG-10)