Schulte RDX-117, Operator'S Manual

Page: 16 / 94

SAFETY
RDX-117 06/20 Safety Section 1-10
© 2020 Alamo Group Inc.
SA
FE
TY
Before disconnecting Snow Blower swing discharge chute to side of
Snow Blower, Lower and lock storage stand in place, Stay away from
front of Snow Blower until equipment is stable and secured from falling.
Sudden or inadvertant falling of equipment could result in serious injury
or death.
(SSB-35)
TRANSPORTING SAFETY INSTRUCTIONS AND PRACTICES
Be particularly careful when transporting the Implement with the Tractor. Turn curves or go
up hills only at a low speed and using a gradual steering angle. Rear mounted implements
move the center of gravity to the rear and remove weight from the front wheels. Make
certain, by adding front ballast, that at least 20% of the tractor’s weight is on the front wheels
to prevent rearing up, loss of steering control or Tractor tip-over. Slow down on rough or
uneven surfaces to prevent loss of steering control which could result in property damage
or possible injury. Do not transport unless 3-Point lift lever is fully raised and in the latched
transport position. Dropping implement in transport can cause serious damage to the
tractor and/or Implement and possibly cause the operator or others to be injured or killed.
(S3PT-02)
Allow sufficient clearance for the Implement to swing outward while turning. Implements
carried behind the Tractor will swing outside the tire path when making turns. Contacting a
solid object while turning will cause equipment damage and possible injury.
(S3PT-20)
Make certain that the “Slow Moving Vehicle” (SMV) sign is installed in
such a way as to be clearly visible and legible. When transporting the
Equipment use the Tractor flashing warning lights and follow all local
traffic regulations.
(SG-6 )