Schulte DHX-360, Operator'S Manual

Page: 17 / 82

SAFETY
DHX-360/DHX-600 03/21 Safety Section 1-9
SA
FE
TY
© 2021 Alamo Group Inc.
Cancer and Reproductive Harm www.P65Warnings.ca.gov.
Ensure any remote starting system is inoperative before servicing or cleaning the machine.
Inadvertent engine start up could result in entanglement or runover causing serious injuries
or death.
(SSB-17)
Use extreme care when climbing onto the Equipment to perform repairs, maintenance, and
cleaning. Use proper stands and ladders to access areas that cannot be reached from
ground level. Slipping and falling off the Equipment can cause serious injury or death.
(SSB-
25)
Use caution and wear protective gloves when handling sharp objects such as blades,
knives, and other cutting edges. Be alert to worn component surfaces which have sharp
edges. Sharp surfaces can inflict severe laceration injuries if proper hand protection is not
worn.
(SG-37)
Never run the Tractor engine in a closed building or without adequate ventilation. The
exhaust fumes can be hazardous to your health.
(SG-23)
PARTS INFORMATION
Use of genuine Schulte replacement parts is your guarantee that parts are of the same quality and are
manufactured to the same standards as the original equipment. These parts are made and tested to Schulte
specifications. Non-genuine "will fit" parts do not consistently meet these specifications. The use of "will fit"
parts may reduce the performance, void Schulte warranties, and present a safety hazard. Use genuine
Schulte parts for economy and safety.
(SPSI-2)
SEE YOUR SCHULTE DEALER
Exercise care when handling the discs. Disc blades are SHARP and HEAVY. Wear gloves
at all time to protect your hands.
(STL-10)
Do not use your hands or feet to clean the disc gangs. The discs are sharp and serious
injures could result from inadvertent contact with the discs. Never attempt to stand on the
discs, tires, or frame members of the implement.
(STL-11)
Relieve hydraulic pressure prior to doing any maintenance or repair
work on the Implement. Place the Implement on the ground or
securely blocked up, disengage the PTO, and turn off the tractor
engine. Push and pull the Remote Cylinder lever in and out several
times. Disconnect and remove the Implement hydraulic hoses from
the tractor prior to starting any maintenance or repair work.
(STL-17)
Never attempt to remove a jam or service the implement until the Implement Hydraulic
Hoses have been DISCONNECTED AND REMOVED from the tractor. Serious body injury
or death can result from entanglement with the rotating components of the conveyer.
(STL-25)