SCHOTT TITRONIC universal, Operating Instructions Manual

Page: 25 / 27

46
10 Storage, transportation and environment
If the TITRONIC
â
â â
â
universal Piston Burette has to be stored temporarily or transported, the original packing
will provide the best protection for the device. In many case, however, this packing is no longer available,
so that a comparable makeshift packing has to be put together. Sealing the TITRONIC
â â â â
universal Piston
Burette in a foil has proven to be a good solution.
Before doing so, please make sure
that the dosing unit has been rinsed with distilled water
and contains no liquid.
If the TITRONIC
â â â â
universal Piston Burette has to be sent in for repair, please state the titration solution
last used on the accompanying papers or on the TITRONIC
â â â â
universal Piston Burette itself. Otherwise the
service department will dispose of the damaged or replaced parts as special waste on the customer’s ac-
count.
The device should be stored in a room meeting the following requirements:
Ü temperature between + 10 and + 40 °C for operation and storage,
Ü humidity according to EN 61 010, Part 1:
max. ref. humidity 80 % for temperatures up to 31 °C,
linear decrease down to 50 % relative humidity at a temperature of 40 °C
Your TITRONIC
â
â â
â
universal Piston Burette will have a very long life,
so that this information is in fact given far too early:
But when the end of its lifetime has come, please observe the regulations of your country and town
regarding disposal.