background image

11

Main Menu

Settings Menu

Description

Material

To select a material characteristic for the measure-
ment.
In addition, a calibration can be executed for the  
selected material characteristic, as well as a name 
and  limit values can be defined in the material setup 
menu. The first material characteristic (factory calibra-
tion) can not be recalibrated.

Display
Chapter 3.2

[Numeric]

[Bargraph]

[Graphic]

•  Measured value displayed as number and alarm 

 

  monitoring

•  Measured value displayed as number, bar graph 

 

  trend display and alarm monitoring

•  Measured value displayed as graphical 

 

  trend, measured value/limit values as graph
In the display mode, the different displays can be swit-
ched through by pressing simultaneously 

 and 

Time scale

1

, 2, 5, 10, 30 and

60 seconds

To choose the displayed time period (only graphic 
display)

Alarm

[ON]

, [OFF]

Activate/deactivate the alarm.
The display shows the values of the adjusted material 
characteristic.

Damping  
value

chapter 3.5.3 damping

Material 
setup

chapter 3.4.1 material setup

Tension Unit

[cN]

, [g], [lb], [N],

Set the measurement unit.

Backlight

[OFF], [Minimum],
[Medium],  

[Maximum]

For adjusting the brightness of the display.

Background

[white]

, [black]

A white or black display background can be adjusted

Scr. Rotation

[AUTO], 

[0°], [90°], 

[180°], [270°]

To set the display rotation to be fixed or to automati-
cally adapt to the current orientation of the device.

Auto Power 
Off

[OFF] , 

[ON]

Toggle the „Auto Power off“ function on and off.

Language

English

, German, 

Spanish, Portuguese, 
French

Select between the four user languages.

Factory reset

Reset to the factory settings.

3.4  Tension meter settings

Factory settings are illustrated bold

Summary of Contents for ZE Series

























Reviews: