9
Press the POWER key until the DISPLAY momentarily shows the tension range and the
software version, e.g. E 1.0, followed by random values or “0.”
3.3.2 Switch-On
3.3.3 Switch-Off
Auto power off
:
- The tension meter switches off automatically after 3 minutes of non-use.
Manual switch-off
:
- Press the POWER key for 5 seconds.
3.3.4 Reversing the Display
When you shift the tension meter from the right to the left
hand, you can rotate the readings on the DISPLAY by 180°.
Measuring with the left hand:
- If you would like to use the left hand for measuring, you
should reverse the readings
on the DISPLAY to make them easier to read.
Requirement
:
Tension meter switched off as described in Chapter 3.3.3.
To rotate the display by 180°
- Press and hold the DAMP and POWER keys until the
DISPLAY shows the readings the other way around.
Measuring with the right hand
:
Requirement
:
Tension meter switched off as described in Chapter 3.3.3.
To restore the default orientation
:
- Press and hold the DAMP and POWER keys until the
DISPLAY shows the readings in the default orientation.
3.3.5 Selecting the Unit of Measure
You can set the ETB to the cN or g unit of measure, depending on the required tension
range. The default setting is cN.
Requirement
:
Tension meter switched off as described in Chapter 3.3.3.
To select the unit of measure
:
- Press and hold the RECALL and POWER keys until the new unit of measure
0
g
is indicated on the DISPLAY.
fig. 3.3.4a
234
ZERO
POWER
HOLD
RECALL
AMP
MEM
CLEAR
fig. 3.3.4b
234
ZERO
POWER
HOLD
RECALL
DAMP
ME
CLEAR