19
4.2 Replacing the Rollers/Ceramic Pins
To remove the filament guide
:
Required tools
:
Screwdriver with 1.5 mm blade width
Open end wrench with 4 mm jaw width
fig. 4.2a
- Loosen the setscrews (2x) with the
supplied screwdriver (1.5 mm blade width).
fig. 4.2c
- Slide the filament guide down the roller
shafts in the direction of the arrow.
fig. 4.2d
Replacing rollers by ceramic pins or ceramic pins by rollers can only
be performed at the manufacturer´s facility.
GUIDE ROLLERS (2x)
ROLLER SHAFTS (3x)
FILAMENT GUIDE
SETSCREWS (2x)
MEASURING ROLLER
GRUBSCREWS (3x)
fig. 4.2b