19
3.5.2 Zero adjustment of the measurement position
Each time the measurement position is changed, the tension meter will automatically
perform a zero adjustment.
If the tension meter does not display zero in its measuring position, perform
a manual zero adjustment procedure.
For this purpose, no material to be measured must have been inserted yet!
Requirements:
- The tension meter has been switched on as described in chapter 3.3.2.
To carry out zero adjustment:
- Bring the tension meter into the desired measuring position and make sure not to move
it.
- Press the
button.
The DISPLAY momentarily shows
0 0 0 0
and then switches to
0
cN
.
The tension meter is now adjusted to its new measuring position and ready to take
measurements.