10
3.1.1 Stationary mounting of the unit - optional
(Code MH - with distance bolts)
Distance bolts length 10 mm, Thread size M5
Thread depth max. 5 mm
Hole distance 23 mm
fig. 3.1.1
Optionally, the tension meter can be delivered with distance bolts for stationary use. The
dimensions are given in Fig. 3.1.1. The distance bolts can be removed.
Only factory-made threaded holes for the distance bolts are permissible
(otherwise, we cannot accept any warranty).
3.1.2 Wi-Fi communication (optional)
(Code WL - with Wi-Fi antenna)
Tension meters equipped with the Wi-Fi feature can transmit measured values to a PC
via Wi-Fi.
Requirements:
- The Wi-Fi feature must have been enabled in the Wi-Fi Setup.
Manual connection to a network
- Select „Wi-Fi Setup/Settings“ and enter the name of the network (SSID) and the
password (PW).
Automatic connection to a network
- Select Scan Network in the menu „Wi-Fi Setup/Settings“.
All available networks will be displayed.
- Select the desired network and confirm the network name (SSID) by pressing
.
- Enter the password required for this network and confirm with
.
The name (SSID) of the currently selected network is displayed under „Wi-Fi
Setup/Settings“.
If you do not need the Wi-Fi feature you can remove the antenna.
