Schmidt
Mess- und Regeltechnik
©2021
Schmidt
Mess- und Regeltechnik
Fon 0 67 32 - 91 91 20 Fax 0 67 32 - 96 24 42
Operating Manual
Flow Limiter BA, BB, BC, BF
Mechanical flow limiter
B
-E
N
_
BA
-BB
-BC
-BF
-20211021
8
Warning!
Risk of injury on sharp edges and pointed
corners!
Sharp edges and pointed corners can cause
abrasions and skin cuts
▪
Proceed with caution when working near
sharp edges and pointed corners
▪
If in doubt, wear protective gloves
2.3.2 Hazards from high or low temperatures
Hot or cold surfaces
Warning!
Risk of injury from hot or cold surfaces!
Surfaces of components may heat up/cool down
dramatically due to the media flowing through
them. Skin contact with hot or cold surfaces may
cause severe skin burn or frostbite.
▪
Always wear temperature resistant protective
work clothing and protective gloves when
working near hot/cold surfaces
▪
Before commencing work, make sure that all
surfaces have been cooled down or warmed
up to ambient temperature
2.3.3 Hazards caused by media
Hazardous media
Warning!
Risk of injury from hazardous media!
If the flow monitor is used for toxic, corrosive or
very hot/cold media, there is a risk of serious
injury from escaping media.
▪
Observe details in the safety data sheet of the
media
▪
Comply with the safety, accident prevention
and environmental protection regulations
appropriate to the media used
▪
Wear personal protective equipment in
accordance with the safety data sheet
2.4 Personnel requirements
Warning!
Risk of injury due to insufficiently trained and
qualified personnel!
If unqualified personnel work on the device or are
located within its hazard zone, dangers arise
which may result in serious injury and
considerable damage to property.
▪
All work must be performed by qualified
personnel only.
▪
Keep unqualified personnel away from hazard
zones.
Authorized personnel is to be restricted to those
persons who can be expected to perform their
work reliably. Persons whose ability to respond
is influenced, e.g. by drugs, alcohol or
medication, are not authorized.
Observe the age and occupational regulations
at the site when choosing personnel.
The following lists the personnel qualifications
for the various areas of activity:
