Schmidt
Mess- und Regeltechnik
©2021
Schmidt
Mess- und Regeltechnik
Fon 0 67 32 - 91 91 20 Fax 0 67 32 - 96 24 42
Operating Manual
Flow Limiter BA, BB, BC, BF
Mechanical flow limiter
B
-E
N
_
BA
-BB
-BC
-BF
-20211021
6
Danger!
This combination of symbol and signal word
indicates an immediate, dangerous condition that
results in death or serious injury if it is not
avoided.
Warning!
This combination of symbol and signal word
indicates an immediate, dangerous condition that
results in death or serious injury if it is not
avoided.
Caution!
This combination of symbol and signal word
indicates a possibly dangerous condition that
might result in minor or slight injury if it is not
avoided.
Notice!
This combination of symbol and signal word
indicates a possibly dangerous condition that
might result in damage to property and to the
environment if it is not avoided.
Tips and recommendations
This symbol emphasizes useful tips and
recommendations as well as information for
efficient and failure-free operation.
Signs used in these instructions
The following signs and highlightings are used in
these instructions to identify handling instructions,
the description of results, lists/enumerations,
references and other elements:
1.
Designates step-by-step handling instructions
Designates a state or an automatic sequence
as a result of a specific operating step
▪
Designates randomly ordered enumerations and
list entries
Designates references to chapters in these
instructions
2.2. Correct use in accordance with these
instructions
The device is designed and constructed
exclusively for the intended use described herein.
Danger!
The Fahrenheit and PSI measurement units in
these operating instructions have been rounded
down for easier readability!
Always refer to the metric units for calculations and
dimensioning of e.g. the pipe system!
Table 1: Correct use in non-hazard areas
The flow limiter serves exclusively to limit or
regulate the continuous flow of water within a
temperature range of 0 °C to 200 °C / 32 °F to
392 °F. The required control pressure
is between 2 and 10 bar / 29 psi and 145 psi. The
maximum operating pressure is 10 bar / 145 psi.
!
i
