Schmidt BA, Operating Manual, Page: 19 / 31

Schmidt Mess- und Regeltechnik
©2021 Schmidt Mess- und Regeltechnik
Fon 0 67 32 - 91 91 20 Fax 0 67 32 - 96 24 42 info@schmidt-messtechnik.de
Operating Manual
Flow Limiter BA, BB, BC, BF
Mechanical flow limiter
B
-E
N
_
BA
-BB
-BC
-BF
-20211021
19
8 Maintenance
8.1 Safety
Maintenance work performed incorrectly
Warning!
Risk of injury due to maintenance
work performed incorrectly!
Maintenance work performed incorrectly can
result in severe injury and considerable damage
to property.
▪
Ensure that the site is sufficiently cleared
before commencing work.
▪
Ensure that the repair location is orderly and
clean! Components and tools that are lying
about or on top of each other are potential
causes for accidents.
▪
Before placing the device back into operation
ensure that all work has been performed and
completed in compliance with the
specifications and instructions in these
Operating Instructions.
8.2 Maintenance table
Maintenance interval and replacement of
defective parts
Notice!
▪
Disassembling the device is prohibited!
Disassembling the device will void the
warranty!
▪
Disassembly and replacement of defective
parts may only be performed by the
manufacturer! Only maintenance work is
allowed, which does not require disassembly.
The device must be returned to the manufacturer
for maintenance requiring disassembly.
The following maintenance work can be
performed without disassembling the device:
8.3 Removal from the pipe system
The flow limiter must first be removed
from the pipe system before performing
maintenance.
Warning!
Risk of injury from pressurized lines!
Severe injury may result if the pipe system is
under pressure when removing the device.
▪
Depressurize the system before removing the
device
Warning!
Risk of injury from hot or cold surfaces!
Pipelines can heat up/cool down dramatically
due to the media flowing through them. Skin
contact with hot or cold surfaces causes severe
skin burn or frostbite.
Intervall Maintenance work Personnel
As
required
Check the device for
any signs of leakage Qualified
personnel
Clean the device Qualified
personnel