3 Assembly and start-up
SCHMIDT
®
ElectricPress 343-345
– V2.1
11
Mount the safety plate to the adapter plate.
To lift the press head, a threaded hole is provided on the press head to
fasten a lifting screw.
Screw the lifting screw for the lifting equipment into the threaded hole
provided for this purpose. It is located on the upper side of the press
head.
Place the press head with the lifting equipment into the adapter plate.
Tighten the locking screws firmly.
Figure 3: Press head with adapter plate (example)
1
Dovetail guide
2
Lifting screw
3
Locking screws
4
Safety plate
5
Adapter plate
3.4 Mounting tools
DANGER
Injuries caused by closing tools
When working with the press, there is a risk that persons will interfere with
the closing action of the tools. This may result in injuries such as crushed
fingers and hands.
Take necessary safety measures that prevent persons from interfering
with the closing action.
Inform the personnel about this source of risk!