schmersal SLC440AS, Operating Instructions Manual

Page: 1 / 16

EN
Operating instructions pages 1 to 16
Original
SLC440AS
SLG440AS
Operating instructions
Safety light curtain/safety light grid
EN 1
1. About this document
1.1 Function
This operating instructions manual provides all the information you
need for the mounting, set-up and commissioning to ensure the safe
operation and disassembly of the safety switchgear The operating
instructions must be available in a legible condition and a complete
version in the vicinity of the device
1.2 Target group: authorised qualified personnel
All operations described in this operating instructions manual must
be carried out by trained specialist personnel, authorised by the plant
operator only
Please make sure that you have read and understood these operating
instructions and that you know all applicable legislations regarding
occupational safety and accident prevention prior to installation and
putting the component into operation
The machine builder must carefully select the harmonised standards
to be complied with as well as other technical specifications for the
selection, mounting and integration of the components
1.3 Explanation of the symbols used
Information, hint, note:
This symbol is used for identifying useful additional information
Caution:
Failure to comply with this warning notice could
lead to failures or malfunctions
Warning: Failure to comply with this warning notice could
lead to physical injury and/or damage to the machine
Content
1 About this document
11 Function 1
12 Target group: authorised qualified personnel 1
13 Explanation of the symbols used 1
14 Appropriate use 2
15 General safety instructions 2
16 Warning about misuse 2
17 Exclusion of liability 2
2 Product description
21 Destination and use 2
22 Ordering code 2
23 Special versions 2
24 Scope of delivery and accessories 2
241 Accessories included in delivery 2
242 Optional accessories 2
25 Technical data 3
26 Response time (reaction time) 3
27 Safety classification 4
28 Functions 4
281 Fixed blanking SLC440AS 4
282 Fixed blanking with movable edge region SLC440AS 4
283 Variable blanking SLC440AS 5
284 Variable blanking SLG440AS 5
29 Self-test 6
210 Beam coding A 6
211 Parameter setting 6
3 Mounting
31 General conditions 7
32 Protection field and approach 7
33 Alignment of the sensors 8
34 Set-up tool and set-up mode 8
35 Safety distance 9
351 Minimum distance to reflecting surfaces 10
36 Dimensions transmitter and receiver 10
37 Fixing 12
4 Electrical connection
41 General information for electrical connection 13
5 Functions and configuration
51 Programming the slave address 13
52 Configuration of the safety monitor 13
53 Status signal "safety release" 13
6 Diagnostic
61 Status information LED 13
62 Fault diagnostic 14
63 AS-i diagnostics indication 14
64 Read-out of the parameter ports 14
65 Diagnostic signal periphery error (FID) 14
7 Set-up and maintenance
71 Check before start-up 14
72 Maintenance 15
73 Regular check 15
74 Half-yearly inspection 15
75 Cleaning 15
8 Disassembly and disposal
81 Disassembly 15
82 Disposal 15
9 Appendix
91 Contact 15
10 EU Declaration of conformity
x
000 / 07
2016 / v
A
- 103007573-EN / C / 2016-07-13 /
AE-Nr
6297