schmersal SLC 420 IP 69 K, Operating Instructions Manual

Page: 2 / 16

2 EN
SLC 420 IP 69 K
Operating instructions
Safety light curtain
The safety switchgear must be exclusively used in accordance with the
versions listed below or for the applications authorised by the manufac-
turer Detailed information regarding the range of applications can be
found in the chapter "Product description"
1.5 General safety instructions
The user must observe the safety instructions in this operating instruc-
tions manual, the country-specific installation standards as well as all
prevailing safety regulations and accident prevention rules
Further technical information can be found in the Schmersal
catalogues or in the online catalogue on the Internet:
wwwschmersalnet
The information contained in this operating instructions manual is pro-
vided without liability and is subject to technical modifications
If multiple safety components are wired in series, the Per-
formance Level to EN ISO 13849-1 will be reduced due to the
restricted error detection under certain circumstances The
entire concept of the control system, in which the safety com-
ponent is integrated, must be validated to EN ISO 13849-2
There are no residual risks, provided that the safety instructions as well
as the instructions regarding mounting, commissioning, operation and
maintenance are observed
Additional measures could be required to ensure that the electro-sensi-
tive device does not present a dangerous breakdown, when other forms
of light beams are available in a special application (eg use of wireless
control devices on cranes, radiation of welding sparks or effects of
stroboscopic lights)
1.6 Warning about misuse
In case of inadequate or improper use or manipulations of the
safety switchgear, personal hazards or damages to machin-
ery or plant components cannot be excluded The relevant
requirements of the standards EN ISO 13855 (successor of
EN 999) and EN ISO 13857 must be observed
1.7 Exclusion of liability
We shall accept no liability for damages and malfunctions resulting from
defective mounting or failure to comply with this operating instructions
manual The manufacturer shall accept no liability for damages result-
ing from the use of unauthorised spare parts or accessories
For safety reasons, invasive work on the device as well as arbitrary re-
pairs, conversions and modifications to the device are strictly forbidden;
the manufacturer shall accept no liability for damages resulting from
such invasive work, arbitrary repairs, conversions and/or modifications
to the device
2. Product description
2.1 Ordering code
This operating instructions manual applies to the following types:
SLC 420-E/R
➀
-
➁
-69-RFB
No. Option Description
➀
xxxx Protection field heights in mm available
lengths: 0170, 0250, 0330, 0410, 0490,
0570, 0650, 0730, 0810, 0890, 0970, 1050,
1130, 1210, 1290, 1370, 1450
➁
14 Resolution 14 mm
with a range of 03 m … 7 m
30 Resolution 30 mm with a
range of 03 m … 10 m
Only if the information described in this operating instruc-
tions manual are realised correctly, the safety function and
therefore the compliance with the Machinery Directive is
maintained
2.2 Special versions
For special versions, which are not listed in the order code below 21,
these specifications apply accordingly, provided that they correspond to
the standard version
2.3 Scope of delivery and accessories
Accessories included in delivery
Connecting cable for emitter and receiver
Cable length 5,0 m, cable connector M12 x 1; 4-pole fixed to transmit-
ter, M12 x 1; 8-pole fixed to receiver integrated
Mounting kit MS-1038
The kit includes 4 mounting angles, material V4A and 16 fixing screws,
material V4A for fixation to the end caps
Test rod PLS
The test rod is used for testing the protection field
Optional accessory
Connecting cable for transmitter
Item Number
Designation Description Length
1207741 KA-0804 Female connector M12, 4-pole 5 m
1207742
KA-0805 Female connector M12, 4-pole 10 m
1207743 KA-0808 Female connector M12, 4-pole 20 m
Connecting cable for Receiver
Item Number
Designation Description Length
1207728 KA-0904 Female connector M12, 8-pole 5 m
1207729 KA-0905 Female connector M12, 8-pole 10 m
1207730 KA-0908 Female connector M12, 8-pole 20 m
BUS converter NSR-0801
Converter for parameterisation and diagnostics Detailled information
can be found in the operating instructions manual of the NSR-0801
Included in delivery: integrated connecting cable, PC-software USB 20
connection (L x W x H, 122 x 60 x 35 mm), indications of measure-
ments without cable