4
Operating instructions
Control panel with emergency stop
BDF 200 AS
EN
4. Electrical connection
4.1 General information for electrical connection
The electrical connection may only be carried out by authorised
personnel in a de-energised condition
The AS-i Safety Slave with emergency stop function and the AS-i A/B
Slave with the functions of the command and signalling devices are
supplied by the AS-Interface cable
The connection to the AS-Interface system is realised through an M12
connector The connector is A- coded, the wiring configuration is deter-
mined as follows (to EN 50295)
spare
3
2
1
4
AS-Interface - (blue)
AS-Int (brown)
spare
5. Functions and configuration
5.1 Positions of the actuating elements
Pos. 1
Pos. 2
Pos. 3
Pos. 4
5.2 Emergency stop function
Position 1: AS-i Safety-Slave
Emergency stop pushbutton and G24 indicator lamp:
NH, NHK, G24
• Emergency stop DI 0 … DI 3, dynamic code transmission
• Indicator lamp
DO 0 RED
• Indicator lamp
DO 1 GREEN
5.3 Configuration of the safety monitor
The emergency stop function of the BDF 200 AS can be configured
in the ASIMON configuration software with the following monitoring
devices (also refer to the ASIMON manual)
Double channel forced
• Optionally with startup test
• Optional with local acknowledge
The coniguration of the safety monitor must be tested and
conirmed by a qualiied and authorised safety expert/safety
engineer
5.4 Function of the command and signalling devices
Position 2: AS-i A/B-Slave
Maintained selector switch / spring-return selector switch,
2 positions:
WS20, WT20, SWS20, SWT20
1
0
• Position 0
---
• Position 1
DI 2 and DI 3
Maintained selector switch / spring-return selector switch,
3 positions:
WS30, WT30, WTS30
• Position 1
DI 3
0
1
2
• Position 0
---
• Position 2
DI 2
WTS30: position 1 = latching; position 2 = pushbutton function
Illuminated pushbuttons, pushbuttons and indicator lights:
LT, DT, LM
• Pushbutton function
DI 2 and DI 3
• Indicator lights
DO 2
Position 3: AS-i A/B-Slave
Illuminated pushbuttons, pushbuttons and indicator lights:
LT, DT, LM
• Pushbutton function
DI 1
• Indicator lights
DO 1
Position 4: AS-i A/B-Slave
Illuminated pushbuttons, pushbuttons and indicator lights:
LT, DT, LM
• Pushbutton function
DI 0
• Indicator lights
DO 0
