Schmeiser HBT2N Operation And Parts Manual Download Page 27

T .G . Schmeiser Co ., Inc .

P.O. Box 1392 – Selma, CA 93662

Phone (559) 268-8128  Fax (559) 268-3279

LIMITED WARRANTY STATEMENT

T. G. Schmeiser Co., Inc. warrants each new Schmeiser® product to be free from defects in material and workmanship.
This warranty is applicable only for the normal service life expectancy of the product or components, not to exceed
twelve (12) consecutive months from the date of delivery of the new Schmeiser product to the original purchaser.

Genuine T. G. Schmeiser Co., Inc. replacement parts and components will be warranted for 90 days from date of
purchase, or the remainder of the original equipment warranty period, whichever is longer.

Under no circumstances will it cover any merchandise or components thereof, which, in the opinion of the company, has
been subjected to misuse, unauthorized modifications, alteration, an accident or if repairs have been made with parts
other than those obtainable through T. G. Schmeiser Co., Inc.

The Company in no way warrants engines, batteries, cylinders, tires or other trade accessories since these items are
warranted separately by their respective manufacturer.  Expendable components such as points, shanks, blades, rings,
bearings, teeth, and the like are excluded from this warranty.

Our obligation under this warranty shall be limited to repairing or replacing, free of charge to the original purchaser, any
part that, in our judgment, shall show evidence of such defect, provided further that such part shall be returned within
thirty (30) days from date of failure to T. G. Schmeiser Co., Inc., routed through the dealer and distributor from whom the
purchase was made, transportation charges prepaid.

This warranty shall not be interpreted to render T. G. Schmeiser Co., Inc. liable for injury or damages of any kind or
nature to person or property. This warranty does not extend to the loss of crops, loss because of delay in harvesting, or
any expense or loss incurred for labor, substitute machinery, rental or for any other reason.

Except as set forth above, 

T . G . Schmeiser Co ., Inc . shall have no obligation or liability of any kind on account

of any of its equipment and shall not be liable for special or consequential damages . T . G . Schmeiser Co .,
Inc. makes no other warranty, expressed or implied, and, specifically, T. G. Schmeiser Co., Inc. disclaims any
implied warranty or merchantability or fitness for a particular purpose. Some states or provinces do not permit
limitations or exclusions of implied warranties or incidental or consequential damages, so the limitations or
exclusion in this warranty may not apply .

This warranty is subject to any existing conditions of supply, which may directly affect our ability to obtain materials or
manufacture replacement parts.

T. G. Schmeiser Co., Inc. reserves the right to make improvements in design or changes in specifications at any time,
without incurring any obligation to owners of units previously sold.

No one is authorized to alter, modify or enlarge this warranty nor the exclusion, limitations and reservations.

WARRANTY VOID IF NOT REGISTERED

WITHIN 30 DAYS OF PURCHASE DATE

Summary of Contents for HBT2N





























Reviews: