Bin Trailer
T. G. Schmeiser Co., Inc.
Ph. (559) 268-8128
Fax (559) 268-3279
11
Crush Hazard
Use care when attaching the unit
to the tractor . Never place any
part of your body under the tongue or hitch assembly .
Do not allow anyone to stand between moving tractor
and implement during hook-up operations.
Attaching to Tractor
WARNING
Unexpected Separation Hazard
If towing the unit with a drawbar, use only a
certified, hardened drawbar pin with a retainer
clip . Do not use homemade pins, bolts, or any other
type of retaining device . Always install the retainer clip,
making sure the hitch and unit are securely fastened to
the tow vehicle .
Using a pin not intended for this type of towing can result
in unexpected separation of the unit from the tow
vehicle, resulting in equipment damage and personal
injury .
SAFETY INSTRUCTIONS
Connect implement hitch to the tractor properly.
MAINTENANCE SAFETY
WARNING
Use Properly Rated Tools
Use sufficient tools, jacks, and hoists
that have the capacity for the job .
Crush Hazard
Use support blocks or safety stands
rated to support the load when
performing maintenance .
SAFETY INSTRUCTIONS
Never replace hex bolts with less than Grade
5 bolts unless otherwise specified. In locations
where Grade 8 bolts are used, Grade 8
replacements are required .
OEM
If equipment has been altered in any way from the
original design, the manufacturer does not accept any
liability for injury or warranty .
Do not modify unit or safety devices . Do
not weld on the unit . Unauthorized
modifications may impair its function and
safety .
Do not leave tools lying on the unit .
Keep all parts in good condition and properly
installed . Fix damage immediately . Replace
worn or broken parts .
Understand the service procedure before
performing the work . Keep area clean and dry .
Follow all operating, maintenance, and safety
instructions found in this manual .
Where replacement parts are necessary for
periodic maintenance and servicing, genuine
factory replacement parts must be used to
restore the unit to original specifications.
The manufacturer will not accept responsibility for
damages as a result of the use of unapproved parts .
OEM
