Schmalz VCMC-R QUICK Operating Instructions Manual Download Page 3

1  Important Information

1.1  Note on Using this Document

J. Schmalz GmbH is generally referred to as Schmalz in these Operating instructions.

These Operating instructions contain important notes and information about the different 
operating phases of the product:

Transport, storage, start of operations and decommissioning

Safe operation, required maintenance, rectification of any faults

The Operating instructions describe the product at the time of delivery by Schmalz.

1.2  The technical documentation is part of the product

1. For problem-free and safe operation, follow the instructions in the documents.

2. Keep the technical documentation in close proximity to the product. The documentation must be accessible

to personnel at all times.

3. Pass on the technical documentation to subsequent users.

ð

Failure to follow the instructions in these Operating instructions may result in injuries!

ð

Schmalz is not liable for damage or malfunctions that result from failure to heed these instructions.

If you still have questions after reading the technical documentation, contact Schmalz Service at:

www.schmalz.com/services

1.3  Type Plate

The type plate (1) is permanently attached to the prod-
uct at the location shown and must always be clearly
legible.

It contains important information about the product:

Part sales designation/type

Part number

Serial number

Coded date of manufacture

Permitted pressure range

1

Please specify all the information above when ordering replacement parts, making warranty claims or for any
other inquiries.

1.4  Warnings in This Document

Warnings warn against hazards that may occur when handling the product. The signal word indicates the level of
danger.

Signal word

Meaning

WARNING

Indicates a medium-risk hazard that could result in death or serious injury if
not avoided.

CAUTION

Indicates a low-risk hazard that could result in minor or moderate injury if
not avoided.

NOTE

Indicates a danger that leads to property damage.

1.5  Symbol

This symbol indicates useful and important information.

EN-US · 30.30.01.03049 · 00 · 10/21

3 / 15

Summary of Contents for VCMC-R QUICK
















Reviews: