6.3 Setting the Clamping Height
CAUTION
When the clamping disc is lowered, body parts may be present in the clamping range
Crushing of body parts
4
Ensure that the clamping height is set so that the distance between the clamping disc and the
workpiece is less than or equal to 6 mm.
4
Do not reach into the clamping range while the clamping disc is being vacuum-lowered.
Adjust the VCMC to obtain the necessary clamping height:
1.
Opening the quick adjustment mechanism:
Turn
the locking disc counterclockwise until the quick
adjustment mechanism is completely opened.
2.
Releasing the catch of the quick adjustment mech-
anism:
Clasp the clamping disc with both hands
and press and hold the locking disc down by about
4 mm.
ð
This releases the quick-locking mechanism.
3.
CAUTION! When the clamping disc is adjusted
downward, there is the risk of crushing fingertips
in the area shown.
Adjust the clamping height as necessary and then
release the locking disc. Ensure that the distance
between the clamping disc and the workpiece is
less than or equal to 6 mm.
The adjustments can be made in steps of 5 mm.
EN-US · 30.30.01.03049 · 00 · 10/21
11 / 15
