SAFETY INSTRUCTIONS
30.30.01.00127/03
www.schmalz.com
EN | 9
WARNING
Danger due to falling objects
Unauthorized modifications or changes to the lifting device will compromise the
integrity and function of the lifting device.
There is a risk that the load or gripper may fall, crushing body parts or fatally
injuring people in the vicinity.
►
Do not make any on-site modifications to the system.
►
Use only the original connections, mounting holes and attachment materials that
have been provided.
WARNING
Danger of death from falling if used as a means of transport for humans or
animals, or as a climbing aid.
This can result in broken bones, serious injury or even death.
►
Use of the lifting device as a climbing aid or to transport humans or animals is
prohibited!
Requirements and instructions for installation, maintenance and
1.6
operating staff
The lifting device must only be installed and maintained by qualified specialist personnel, mechanics
and electricians. Work on electronic equipment must be carried out by qualified electrical specialists
only.
Qualified personnel is defined as
: an employee who has received technical training and has the
knowledge and experience
– including knowledge of corresponding regulations – necessary to enable
him or her to recognize possible dangers and implement the appropriate safety measures while
performing tasks. Qualified personnel must observe the relevant industry-specific rules and
regulations.
The user’s company must ensure by means of internal measures that all
persons commissioned with the task of setting up, starting up, operating,
maintaining and repairing the lifting device at the company employ only
insured persons who:
Are at least 18 years of age and are mentally and physically fit for the
task
Have been trained in operating and maintaining the lifting device
Have read and understood the operating instructions
Who can be expected to reliably perform the tasks assigned to them.
The operating instructions must be accessible at all times.
The operator is obligated to perform a risk analysis based on the ambient
conditions at the installation location
