background image

2  Safety

Maintenance work may only be carried out by qualified personnel.

 WARNING

Risk of injury due to incorrect maintenance or troubleshooting

4

Check the proper functioning of the product, especially the safety features, after every mainte-
nance or troubleshooting operation.

 CAUTION

Damage due to flying parts

Risk of injury or damage to property!

4

Wear eye protection

4

Before performing maintenance, make sure that the vacuum and compressed air system is at at-
mospheric pressure.

NOTE

Improper maintenance

Damage to the compact terminal and the ejectors!

4

Switch off the supply voltage before any maintenance.

4

Secure it so that it cannot be switched back on.

4

The compact terminal must only be operated with a silencer and press-in screens.

3  Replacing or Adding/Removing Components

This manual provides you with all the information you need to replace or add or remove one or more ejector discs
on one SCTSi.

When replacing an ejector disc, a distinction is made between the following cases:

Identical ejector disc (same part no.)

Non-identical ejector disc

Control module

To replace the control module, the SCTSi must be sent to Schmalz for repair.

Available ejector discs:

Part number

Designation

Description

10.02.02.04673

SCPSt-07-G02-NC

Compact ejector for SCTSi; SCPSt 07 G02 NC

10.02.02.04676

SCPSt-07-G02-NO

Compact ejector for SCTSi; SCPSt 07 G02 NO

10.02.02.04429

SCPSt-10-G02-NC

Compact ejector for SCTSi; SCPSt 10 G02 NC

10.02.02.04681

SCPSt-10-G02-NO

Compact ejector for SCTSi; SCPSt 10 G02 NO

10.02.02.04678

SCPSt-15-G02-NC

Compact ejector for SCTSi; SCPSt 15 G02 NC

10.02.02.04675

SCPSt-15-G02-NO

Compact ejector for SCTSi; SCPSt 15 G02 NO

10.02.02.04674

SCPSt-2-07-G02-NC

Compact ejector for SCTSi; SCPSt 2-07 G02 NC

10.02.02.04677

SCPSt-2-07-G02-NO

Compact ejector for SCTSi; SCPSt 2-07 G02 NO

10.02.02.04683

SCPSt-2-09-G02-NC

Compact ejector for SCTSi; SCPSt 2-09 G02 NC

10.02.02.04682

SCPSt-2-09-G02-NO

Compact ejector for SCTSi; SCPSt 2-09 G02 NO

10.02.02.04679

SCPSt-2-14-G02-NC

Compact ejector for SCTSi; SCPSt 2-14 G02 NC

10.02.02.04680

SCPSt-2-14-G02-NO

Compact ejector for SCTSi; SCPSt 2-14 G02 NO

EN-US · 30.30.01.01934 · 00 · 03/19

3 / 8

Summary of Contents for SCTSi









Reviews: