OPERATOR‘S MANUAL
1
4
NT2 rondo
Version: 27211 -
F
Schmalenberger GmbH + Co. KG
D-72072 Tübingen / Germany
4.10.1
Face plate assembly Installation / Concrete-tile pool
4.10.2
Face plate assembly Installation / Concrete-liner pool
fig. 21
C
Mounting protection film
G
Outer housing
10
Housing
35
Face plate assembly
90
Screw
Remove the mounting protection film (C).
Put on the face plate assembly (35), this
allows the pressure connection (D) and
air connection (L) to slide into one
another.
Fasten to the outer housing (G) with the
screws (90.1).
fig. 22
C
Mounting protection film
10
Housing
30
Clamp ring
35
Face plate assembly
39.1
Screw
74
Screw
90.2
Screw
Remove the mounting protection film (C).
Place the clamp gasket (39.1) between
the housing (10) and the liner and screw
the clamp ring (30) to the housing (10)
using the screws (74). The sealing con-
tact faces must be clean and smooth.
Put on the face plate assembly (35), this
allows the pressure connection (D) and
air connection (L) to slide into one
another. Fasten to the clamp ring (30)
with the screws (90.2).
8318
8319
