Erasing of the Programming
You must proceed as follows to erase a programming period.
1. Access the Programming mode as described previously by
pressing down the button corresponding to the day to modify.
Select the period to erase using the + or - button.
2. You do not have to press down the Mode button to confirm the
selection. However, doing so will not impact on the erasing.
3. Simultaneously press down the + and – buttons to erase the
period programming. The hour displays --:-- and the set point
displays -- to indicate that the programming is erased.
4. The erased period number blinks and you can select another
period to be erased or exit the Programming mode following
one of the 3 methods described above.
Preprogrammed Mode
The Preprogrammed mode allows an automatic programming
of the thermostat. 252 preprogrammings have been defined for
mode and 252, for
mode (A0 to Z1 and 0 to 9; see
appendix 1 to consult the corresponding tables). This mode
gives you the possibility to quickly program the thermostat using
preprogrammings commonly used without having to do it manually.
As from the Automatic mode, it is possible, at any time, to
manually adjust the set point. This set point will be effective until
the next set point change anticipated by the preprogramming.
Note that if the set point is lowered to off (--), the programming
will not be effective.
From this mode, the screen displays the
/
temperature,
the
/
set point, the hour, the day of the week and the letter
and current number of the preprogramming (A0 to Z1 and 0 to 9;
alpha-numeric segment displayed on the right-hand side of the
hour; see appendix 1).
13
