6
SCHLETTER SOLAR GMBH
4. INSTALLING THE FINAL MODULE
Click in 2 RapidPro end clamps and tighten the screws.
Please ensure that the clamp fits against the module frame (see illustration).
Note on disassembly
To loosen or dismantle the module clamps, please proceed as follows: When loosening
the clamps, pull the upper part of the clamp upwards together with the screw so that the
clamp is loosened from the module frame and the screw does not unscrew from the
upper part of the clamp.
Further information regarding our systems is available on our website:
www.schletter-group.com
under Downloads in the solar section.
RAPIDPRO MODULE CLAMP
|
V1
|
INSTALLATION GUIDE
|
202102
SCHLETTER SOLAR GMBH | SUBJECT TO CHANGES
