19.
NOTE
• Manager code and manager card should be controlled by authorised persons only
for security reasons.
• Existing PIN, card/fob and
fi
ngerprint data is deleted automatically after
registration of new manager code.
• Only one manager code can be registered, using 6 - 12 digits.
• After the manager code which was used in safety mode is entered and # is
pressed, all existing PIN code/card/
fi
ngerprint data will be deleted. The newly
registered code is for use in normal mode.
• To register multiple codes, input new user codes and press * successively.
• Make mode changes and the set-up of new codes when the door is open to
prevent unintentional locking.
• After changing an entry code, verify it by unlocking the door with the new entry
code.
Safety Mode > Normal Mode
Open the battery
cover, and press the
10KEY button for
approx. 5 seconds
Enter manager
code
Press #
Enter new PIN
code
Press #
Press #
Enter new PIN
code again
