INSTALLATION INSTRUCTIONS
SCHLAGE KC5196-R/KC5196-2-R
FORM 59007-C
6-2007
PAGE 4
5. SET HAND (IF REQUIRED):
Use a 5/32” hex wrench to change the hand of
the levers if necessary. Apply Loctite 242 to
threads.
4. INSTALL LATCH:
6. INSTALL OUTSIDE SPINDLE AND RETRACTOR:
IMPORTANT:
When installing spindle
and retractor, make sure
that the dot on the cam
is facing down. Insert
spindle as shown.
DOT
Remove and retain the
latch guard and screw.
OUTSIDE SPINDLE
Refer to chart on right to determine
the correct spindle to use
.
Short Spindle
Long Spindle
*
*
Long spindle has band
.
1.5" - 1.75"
(1-1/2" - 1-3/4")
1.76" - 2.00"
(1-7/8" - 2")
Door Thickness
Use
