6
CO-200 Offl ine Lock User Guide
MANUAL LOCK PROGRAMMING
Left LED
Right LED
!
When adding a card credential, the 3-6 digit code (PIN) entered prior to presenting the card
becomes the credential reference number. This number can be used to delete a card without
physically having the card. Keep a log of all issued credential reference numbers and codes
for future reference.
Credential Types
Credential Type
Function
Description
Programming
Used to program the lock – does not unlock the lock Five-digit code OR card
Normal Use
Unlocks the lock
PIN (3 - 6 digits) OR card
Normal Use +PIN
PIN (3 - 6 digits) AND card
Toggle
Changes the state of the lock from locked to
unlocked, or vice versa, unless in a Freeze state
PIN (3 - 6 digits) OR card
PIN
PIN (3 - 6 digits) AND card
Freeze
Freezes the lock in the current state – lock remains
frozen until Freeze credential is presented again
PIN (3 - 6 digits) OR card
PIN
PIN (3 - 6 digits) AND card
Pass-Through
Unlocks a lock momentarily, regardless of state
Overrides a lock in Freeze state
PIN (3 - 6 digits) OR card
Pass-TPIN
PIN (3 - 6 digits) AND card
Programming Legend
Symbol
Description
[Programming Code]
1
Five-digit code, identical to programming credential
code listed in the Credential Types table.
Programming Card
Programming Card, identical to programming
credential card listed in the Credential Types table.
[PIN]
Three- to Six-digit code. A PIN can be any of the
PIN code types listed in the Credential Types table.
A PIN entered before a card credential becomes the
credential reference number.
Asterisk key on the keypad
-
Number keys on the keypad
Schlage button
1 Programming codes such as 1-1-1 or 1-2-3-4 can be easily selected by non-authorized
users and should not be used.
TIPS
The Schlage button has two different
LEDs, one on the left and one on the right.
All locks have a default programming
code of 97531 and “
*
”.
All locks have a default normal use
code of 13579 and “#”.
TIP
Use the same
programming code
for all locks in the
facility.
