background image

Locking and unlocking

You can lock and unlock your door 
with a simple press using the app!

To lock your door just 
tap the   lock.

You can also lock your door by 
entering a user code while the 
door is closed.
You can also lock your door 
from inside by turning the 
thumbturn toward the door 
edge.

To unlock your door 
enter a user code.

You can also unlock your door 
from inside by turning the 
thumbturn away from the door 
edge.

Emergency key override

Emergency key override can be used when the battery is 
completely dead, or when no valid access code is known.
Insert key and rotate to unlock, just like any lock. Now install 4 
new alkaline AA batteries.
This lock may be rekeyed to match other locks in a residence. 
Contact a locksmith for assistance.

Factory Default Reset (FDR)

When should you perform a Factory Default Reset?

•  If you want to move the lock to a different door, you need 

to restore default settings, move the lock to the new door, 
and then set up the lock again.

•  If you have forgotten your Programming Code, you can 

restore the default codes.

•  If you have set up your lock using the mobile app, and 

would like to force the lock to unpair from all mobile 
devices, erase all codes, and restore the factory default 
settings and default codes.

WARNING

Locate the default Programming and access codes 
on the front of this guide or the back of the Alarm 
Assembly before beginning! Default Programming and 
access codes will be restored. All existing access codes 
and current Programming Code will be erased. 

CUSTOMER SERVICE CANNOT RETRIEVE LOST 
DEFAULT CODES! DO NOT RESTORE FACTORY 
SETTINGS UNLESS YOU CAN LOCATE THE 
DEFAULT CODES.

1.  Take off the battery cover. 
2.  Press and hold the black circle reset button to the right of 

the thumbturn on the inside of the lock for 7 seconds then 
release. 

3.  Once the factory default reset is successful, all of the 

keypad lights will light up for 3 seconds. The blue 
checkmark will stay on for an additional 2 seconds and will 
beep.

 

L

The red “X” on the lock icon will light up and the lock 
will beep if the FDR fails.

User Guide

Summary of Contents for BE489WB









Reviews: