5d Secure the inside assembly with screws.
6
Install batteries.
• Replace the batteries in your lock at the same time each
year that you test and replace the batteries in your smoke
alarms. This will ensure continued reliable operation.
• Use four high-quality alkaline AA batteries for
replacement.
Lithium batteries may have a longer life, but
when they begin to fail, they fail quickly. We don’t
recommend them because they don’t give you a
lot of time to change your batteries before the lock
is completely dead.
6a Remove the battery holder and insert batteries.
6b Reinstall the battery pack and battery cover. Make
sure the batteries face the door.
You’re not finished yet! You must perform the set up
procedure in the next step for the lock to work!
7
Start setup procedure.
IMPORTANT!
You must perform setup procedure before using your lock.
Make sure door is open before beginning!
7a With door open, enter one of the default user
codes.
7b Wait until the bolt stops moving before continuing.
8
Test your lock.
8a Close your door.
8b Extend and retract the bolt using the inside
thumbturn.
8c Make sure the bolt retracts smoothly.
8d Open your door.
8e Extend the bolt using the inside thumbturn.
8f Now enter a user code at the touchscreen. The
bolt should retract.
Download the app!
Just search for “TBD” in the App Store or on Google Play.
Once you connect your lock to your app, the manual
programming functions will be disabled and any access codes
will be deleted.
Be sure to accept any available firmware upgrades. The app
will alert you to upgrades and walk you through the process.
The Schlage Sense app works on iPhone, iPad, and iPod touch with iOS 9.3 or later or
devices with Android 5.0 or later.
Apple HomeKit™ technology provides an easy, secure way to control your home’s
lights, doors, thermostats, and more from your iPhone®, iPad®, or iPod touch®.
HomeKit requires an iPhone, iPad, or iPod touch with iOS 9.3 or later.
HomeKit is a trademark of Apple Inc. Use of the HomeKit logo means that an
electronic accessory has been designed to connect specifically to iPod, iPhone, or
iPad, respectively, and has been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use of this accessory with
iPod, iPhone, or iPad may affect wireless performance.
Apple, iPhone, iPad, iPad Air, and iPod touch are trademarks of Apple Inc., registered
in the U.S. and other countries. HomeKit is a trademark of Apple Inc.
Google Play and the Google Play logo are trademarks of Google Inc. Android is a
trademark of Google Inc.
That wasn’t so bad, was it?
Your lock is now installed! Take a look at the next pages for
basic manual programming instructions.
