8 • Schlage • ANT400 user guide
Connect the coax cable
The coax cable furnished with all antenna models:
• is suitable for outdoor installation
• should be routed with minimum bends, and when necessary any bend radius should be
greater than two (2) inches
• is properly terminated and
should not be cut to length
• if there is excess coax, it should be coiled no less than eight (8) inches in diameter
• should not have excess coax placed inside or near the antenna, or inside the PIM400
enclosure.
L
The grounding block must be connected to earth ground.
L
Cable connections must be securely fastened.
L
Outdoor antennas that are exposed to weather may require weatherproofing on
coax connections.
Antenna
ANT400-REM-CEILING ANT400-REM-HALL
ANT400-REM-I/O
ANT400-REM-I/O+6dB
Application
With lightning protection
Components
5 foot coax (non-plenum) N Type male both ends
Grounding kit N type female bulkhead both ends
15 foot coax (non-plenum) N type male straight
plug both ends
Coax whip N female bulkhead one end, reverse
MCX other end
OR
OR
PIM400-485
(version 2)
PIM400-485 (version 1)
OR
PIM400-TD2
WRI400
Typical coax connections