5
AD-400 /AD-401 Networked Wireless Lock User Guide
OPTIONAL INSIDE PUSH BUTTON (IPB)
• The inside push button (IPB) state is communicated to the access control panel by the
PIM400-485. The manner in which the network access control software utilizes this
communication is confi gured at the host. The IPB may be used to communicate a lock/unlock
request or be completely ignored by the network software.
• AD-400 IPB activity will only be reported to control systems connected to a PIM400-485 with a
RS-485 connection.
• The IPB may be confi gured by the ACP or SUS to take direct action on the lock state in case
communication from the control system to the AD-400 fails and the lock remains powered.
USER MANAGEMENT
User management is controlled by the access control system. If the access control panel has not yet
been connected, use Construction Access Mode to add and delete users.
See Construction Access Mode on page 6 for more information.
For compliance with the UL Standards UL294 and ULCS319, the AD-400/AD-401 must be connected
to an access control panel (ACP) that is UL listed for UL294 for UL installations and ULCS319 for
cUL installations.
