3
CAB
ASSEMBLY
Read these instructions and identify all com-
ponents. Please retain these instructions for
future reference and parts ordering information.
NOTE: If the machine has the electric weight
transfer, you will need to purchase part number
4168587 Multi-Connector wire harness to provide
additional plug outlets for the cab.
Sold separately from your Steiner dealer.
MACHINE PREPARATION
1. Remove all attachments if present.
2. Disconnect power from the battery.
3. Remove the four bolts
A
securing foot plate on
tractor.
Figure 1
4 Lift the foot plate up a few inches and remove
one nut
B
and lock washer
C
from the foot pedal.
Figure 2
5 Completely remove the foot plate from the
machine.
FRONT MOUNT INSTALLATION:
6. If there are no holes located in the side of the
frame from the factory, drill two .531 holes on
each side per
Figure 3
using the Front Mount
Template
(Item 8)
to locate. Place the template
even with the front edge of the frame and drill
holes.
2.78
1.59
3.04
FRONT MOUNT
TEMPLATE
FIGURE 1
FIGURE 2
FIGURE 3
