6
CAB
16. Install the rubber isolators
(Item 10)
onto the rear
mount bracket. Secure the rear mounting bracket
to the back of the cab using hardware:
Figure 11
(4) 3/8" X 2.50" long bolt
(Item 12)
(4) 3/8" nylock nuts
(Item 13)
(4) 3/8" flat washers
(Item 11)
Torque to 30 ft-lb (41 N-m)
17. Tighten the nuts on the U-bolts for the rear mount
installed in Step 13.
18. Remove the existing front cover panel located
under the steering wheel from the machine.
Retain the hardware.
Figure 12
19. Install the new front cover panel
(Item 5)
using
the bolts removed in previous step.
Figure 12
20. Remove existing rear cover panel from machine.
Attach new rear panel
(Item 6)
using:
Figure 13
(4) 5/16" x 1.00 long bolts
(Item 25)
(4) 5/16" flanged nuts
(Item 26)
21. Attach the two "P" clamps on the bungee cord to
the machine at the foot panel using hardware:
Figure 14
(2) 1/4" x .75" long bolts
(Item 31)
(2) 1/4" flanged nuts
(Item 23)
FIGURE 12
FIGURE 13
FIGURE 14
FIGURE 11