Page 33
A
rt.
no.
: 2.
511
235 Rev.:
d
Resting ECG
6
User guide
Manual Rhythm Printout
6.3
CARDIOVIT AT-1 G2
6.3 Manual Rhythm Printout
Use this function to print a real-time ECG. The print parameters such as lead
sequence, print speed and sensitivity can be changed by the user during the printout.
6.3.1
Starting manual printout
Select lead sequence
To change the lead sequence for the printout (Standard I, II, III, aVR, aVL, aVF),
press the key
.
The Standard and Cabrera lead sequences are as follows:
The default lead group is defined in the ECG settings (
see page 41
).
Select speed
To change the printout speed (5,
25
and 50 mm/s), press the corresponding key.
Select sensitivity
To change the printout amplitude (5,
10
and 20 mm/mV), press the
corresponding key.
Stopping the printout
To stop the manual recording (printout), press the
Stop
key.
The printout provides the following information:
• Selected leads
• Heart rate, averaged over four beats
• Patient ID (if entered)
• Name (written by hand on the printout)
• Date and time
• Speed
• Sensitivity
• Filter
• Device name
• Device serial number
• Software version
The real-time ECG is not saved. The chosen settings only apply to the printout.
To start a manual real-time printout, press the
Manual
key.
The factory printout settings are
25 mm/s
and
10 mm/mV.
The following settings are performed via direct keys or via the menu:
Lead sequence
Lead group 1
Lead group 2
Lead group 3
Lead group 4
Standard
I, II, III
aVL, aVF, -aVR
V1, V2, V3,
V4, V5, V6,
Cabrera
aVL, I, -aVR
II, aVF, III
V1, V2, V3,
V4, V5, V6